Analogix ANX7625 SlimPort (Full-HD Transmitter)
-----------------------------------------------

The ANX7625 is DSI to DisplayPort bridge.

Required properties:

 - compatible		: "analogix,anx7625"
 - reg			: I2C address of the device
 - interrupt-parent	: Should be the phandle of the interrupt controller
			  that services interrupts for this device
 - interrupts		: Should contain the INTP interrupt
 - cbl_det-gpios	: Which GPIO to use for cable detection
 - power_en-gpios	: Which GPIO to use for power enable
 - reset_n-gpios	: Which GPIO to use for reset
 - ports		: Port 0 for DSI input, should be a reference to a
			  valid mipi_dsi_host device

Example:

	anx7625: anx7625@ee {
		compatible = "analogix,anx7625";
		reg = <0xee>;
		interrupt-parent = <&qup15>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;   /* INTP */
		cbl_det-gpio = <&qup15 1 GPIO_ACTIVE_HIGH>;
		power_en-gpio = <&pio 27 GPIO_ACTIVE_HIGH>;
		reset_n-gpio = <&pio 49 GPIO_ACTIVE_HIGH>;
		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				anx7625_in: endpoint {
					remote-endpoint = <&dsi_out>;
				};
			};
		};
	};
