* QCOM LLCC PMU Bindings

This represents the miss counters located in the LLCC hardware counters.
Only one event is supported:

 0x1000      	  - LLCC misses

The follow section describes the LLCC PMU DT node binding.

Required properties:
- compatible		: Shall be "qcom,qcom-llcc-pmu"
- reg			: There shall be one resource, a pair of the form
			  < base_address total_size > representing the DDR_LAGG
			  region.
- reg-names		: Shall be "lagg-base".

Example:
	llcc_pmu: llcc-pmu {
		compatible = "qcom,qcom-llcc-pmu";
		reg = < 0x090CC000 0x300 >;
		reg-names = "lagg-base";
	};
